Thermal insulation of the balcony followed by PVC paneling

A large glassed-in balcony demanded serious warming and modern decoration. The walls with the shells of the old oil paint and the chalky ceiling looked depressing.
Warming the balcony from subsequent finishing with PVC panels
As a result of some thought, it was decided to finish the ceiling and walls with PVC panels with preliminary insulation of all surfaces facing the the street. First we needed a dowel-nail of 6 mm diameter and 40 mm length.
 Warming the balcony, followed by finishing with PVC panels
Metal galvanized hangers should be fixed to these dowel-nails.
Warming the balcony, followed by finishing with PVC panels
With a hole punch in the ceiling and walls, holes are punched,the dowel-nails are being driven into, holding the suspensions tightly.
 Warming of the balcony with subsequent PVC-paneling
Warming the balcony, followed by finishing with PVC panels
The slats are securely fastened with slats of 25x40 mm.
 Warmth b alcona with subsequent PVC-panel finishing
Next we cut the heat-insulating material. In this case, a foam of 30 mm thickness is used.  Warming of the balcony with subsequent PVC-paneling
Foam filled the cavities between the slats.
Warming the balcony, followed by finishing with PVC panels
The same procedure is done with all the walls.
Warming the balcony with subsequent finishing with PVC panels
Next neatlycut the panels for the ceiling and start sewing them to the slats using a construction stapler.  Thermal insulation of the balcony followed by PVC panels The ceiling is ready and already shining bright gloss.
Warming balcony with subsequent finishing with PVC panels
At the request of the customer, it is possible to mount the ceiling Ilka laundry. For it, special racks were provided at the right distance.
 Warming of the balcony with the subsequent finishing with PVC panels
Now we are starting to finish the walls. For this, PVC panels with photographic imitation of Egyptian papyrus are selected.  Warming of the balcony with subsequent PVC paneling For more tight fit of the panels, you can periodically podbival hammer them through a soft backing.
Warming balcony withsubsequent finishing with PVC panels
A white finishing corner is mounted in the corners.
 Warming the balcony, followed by finishing with PVC panels
The perimeter of the ceiling and all difficult places are also carefully trimmed with a white plastic corner. This gives the room lightness and graphic design.
 Warming the balcony with the subsequent finishing with PVC panels
For the framing of the window sill the corner is cut along and only a flat strip is used for the finishing.
Warming the balcony, followed by finishing with PVC panels
The door slope is also carefully finished with a decorative corner.
Weatherization of the balcony followed with the finishing PVC panels
At the end a clothes dryer with threads and a system of lowering and lifting linen are mounted. Warming the balcony, followed by finishing with PVC panels The balcony became warm, quiet and beautiful. And now it pleases its owners and causes exclamations of delight from all guests.